Precautions                                                                                                                                               Before use
1. In order to get out the rust,waste water and foreign matter of the tubes, please near the control valve direction install filter;
2. Please use Galvanized、nylon、plastic material tubes;
3. Between the cylinder and control valve direction’s tube,Please be sure the section must have  pistoning speed of effectiv square;
4. Please use compressed air to clear away the foreign matter、fritter before choice tube;
Link component product to the tube,Don’t mixing sach as bag and sticker;
If piston rod carrying more please effect axial action.
After use
5. The suitable temperature is 5-60℃, Up the 60℃,please think the material of the seals; Low the 5℃,please think protected from freezing;
6. Don’t use cylinder in corrosive and dangeous environment, Customers may must use consult with us.
Air compression must be clean,less water into the air;
7. The purpose of the buffer is to use air compressibility, Absorb the function of the moving parts,piston and cover distance not collision;
8. Buffer cylinder had adjust from the factory; By the actual need , Clockwise the minute valve or counterclockwise regulating.
9. Don’t direct use cylinder in cutting fluid、clod fluid、dust、splash environment, Before use this environment add cover in cylinder.
Others:
10. In the more than allow range of large use cylinder, The cylinder may damage;
11. Don’t beat cylinder shell that will the result of defection engine;
12. Please install the cylinder on line;
13. Because of external outside force, sometimes make cylinder inside inertia negative pressure,make the cylinder seal fall ,the leak caused.